標準編號:	DB42/T 483-2008
中文名稱:	低層住宅冷彎薄壁型鋼結構技術規程(湖北地方標準)
英文名稱:	Technical specification for cold-formed thin-wall steel structures of low-rise residences
行業分類:	DB    地方標準
發布機構:	湖北省質量技術監督局
發布日期:	2008-10-1
實施日期:	2008-10-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	40000 字
翻譯價格(元):	1200.0
交付時間:	付款后 1 個工作日

1.0.1 This standard is formulated with a view to promoting the rational design, manufacture and installation of the cold-formed thin-walled steel structures of low-rise residences and living up to the requirements of state-of-art technology, economy and rationality, quality guarantee and safety and usability. 1.0.2 This standard is applicable to the design, manufacture, installation and maintenance of the low-rise residences whose major supporting members adopt the 550MPa high-strength cold-formed thin-walled steel, whose number of floors do not exceed three and whose structural height should not exceed 10m. 1.0.3 While the cold-formed thin-walled steel structures of low-rise residences are designed, they shall incorporate with the practical conditions of the project; the materials, structural concept and construction measures shall be reasonably adopted to guarantee to meet the requirements of the strength, stability and rigidity in the process of transportation, installation and use, and meet the national standards concerning with the requirements of the fire prevention, antisepsis and architecture energy-saving. 1.0.4 For the requirements of the design, manufacture, installation and maintenance of the cold-formed thin-walled steel structures of low-rise residences not stipulated in this standard, the provisions in the relevant national standards shall be complied with.

Foreword Introduction 1 General provisions 2 Normative references 3 Terms and symbols 3. 1 Terms 3.2 Symbols 4 Materials 5 Basic design provisions 5.1 Design principles 5.2 Effects 5.3 Design indices 5.4 The provisions on the deformation of the design indices 5.5 The general requirements on construction 6 Structural arrangement, structural calculation and member calculation 6.1 Structural arrangement 6.2 Structural calculation 6.3 Member calculation 7 Structure 7.1 Requirements on basic structure 7.2 The floor structural requirements 7.3 The roof structural requirements 7.4 The walling structural requirements 8 Fire proof design of cold-formed thin-wall steel structures of low-rise residences 9 Energy - efficiency, sound insulation and moisture-proof design of the cold-formed thin-wall steel structures of low-rise residences 10 Fabrication, installation, equipment installation and corrosion protection 10 1 Fabrication 10.2 Installation 10.3 Equipment installation 10.4Corrosion prevention 11 Project acceptance and maintenance 11.1 Project acceptance 11 2 Maintenance Annex A Annex B Explanation of Wording in this Specification Provision Explanations