標準編號:	CNCA-C12-01-2024
中文名稱:	強制性產品認證實施規則 機動車輛輪胎
英文名稱:	Implementation Rules for Compulsory Product Certification - Tyres for Motor Vehicles
行業分類:	CN
發布日期:	2024-12-30
實施日期:	2025-1-1
標準狀態:	valid
替代舊標準:	CNCA-C12-01:2015 強制性產品認證實施規則 機動車輛輪胎
翻譯語言:	英文
文件格式:	PDF
中文字符數:	8000 字
翻譯價格(元):	1300.0
交付時間:	付款后 1 個工作日

No.: CNCA-C12-01:2024 Implementation rules for compulsory product certification - Tyres for motor vehicles 強制性產品認證實施規則 機動車輛輪胎 (English translation) Issue date: 2024-12-30 Implementation date: 2025-01-01 Issued by the Certification and Accreditation Administration of the People's Republic of China Contents 0 Introduction 1 1 Application scope 1 2 Certification standards 1 3 Certification mode 2 4 Division of certification unit 2 5 Certification application 3 5.1 Submission and acceptance of certification application 3 5.2 Application documents 3 5.3 Implementation arrangement 3 6 Implementation of certification 3 6.1 Enterprise quality assurance capacity and product consistency (CoP) inspection 3 6.2 Type test 4 6.3 Certification evaluation and decision 5 6.4 Certification time limit 6 7 Post-certification supervision 6 7.1 Post-certification follow-up inspection 6 7.2 Sampling testing or inspection on production site 7 7.3 Market sampling testing or inspection 7 7.4 Frequency and time of post-certification supervision 7 7.5 Record of post-certification supervision 8 7.6 Evaluation of post-certification supervision results 8 8 Certification certificate 8 8.1 Maintenance of certification certificate 8 8.2 Contents and use of certification certificate 8 8.3 Change/extension of certification certificate 8 8.4 Cancellation, suspension and revocation of certification certificate 9 9 Certification mark 9 9.1 Pattern of mark 9 9.2 Use requirements 9 10 Charges 10 11 Responsibilities for certification 10 12 Detailed implementation rules for certification 10 Annex Requirements for CoP inspection 12 0 Introduction This document is developed based on the safety risks and certification risks of tyres for motor vehicles, and it stipulates the basic principles and requirements for implementation of compulsory product certification for tyres for motor vehicles. This document shall be used together with general implementation rules including Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination, Implementation rules for compulsory product certification - Utilization of testing resources and other certification results of manufacturing enterprises, and Implementation rules for compulsory product certification - General requirements for factory inspection issued by CNCA. The certification body shall, in accordance with the requirements of general implementation rules and this document, develop detailed implementation rules for certification for use together with general implementation rules and this document. The applicant shall be able to bear corresponding quality and legal responsibilities related to its products applied for certification, including recall and warranty. The manufacturing enterprise and the importer shall ensure the continued compliance of the certified products they produce or import with the requirements of the certification and applicable standards. The compulsory product certification activities in ODM mode shall also meet the requirements of Supplementary provisions concerning ODM mode in the implementation rules for compulsory product certification. 1 Application scope This document is applicable to new pneumatic tyres for motor vehicles, including passenger car tyres and truck tyres, motorcycle tyres, which are originally designed for motor vehicles of Categories M, N, O and L (see GB/T 15089 for the classification and definition of vehicles). This document is not applicable to retreaded tyres and tyres specially designed for racing. Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by CNCA. 2 Certification standards GB 9743 Passenger car tyres, GB 9744 Truck tyres and GB 518 Motorcycle tyres. In principle, the latest editions of the certification standards issued by the national administrative department in charge of standardization shall apply. Any addition of new applicable standards or use of other editions, where necessary, shall be subject to the announcement issued by CNCA stating that corresponding standards are applicable. 3 Certification mode The basic modes for compulsory certification of tyres for motor vehicles are as follows: Enterprise quality assurance capacity and product consistency inspection + type test + post-certification supervision; Note: The enterprise quality assurance capacity and product consistency inspection of tyre products for motor vehicles shall be carried out in the manner of Conformity of Production (CoP) inspection. The post-certification supervision above refers to the post-certification follow-up inspection, sampling testing or inspection on production site, market sampling testing or inspection, or their combinations. The certification body shall implement the classified management on the manufacturing enterprises in accordance with the requirements of the Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination and add sampling testing or inspection on production site, market sampling testing or inspection and other relevant elements, as appropriate, based on the basic certification modes in combination with the classified management results, so as to determine the applicable certification mode for the applicant. 4 Division of certification unit In principle, tyres of the same category [Note 1], the same structure [Note 2] and the same series [Note 3], produced by the same producer (manufacturer) and the same manufacturing enterprise (workplace) are divided into one certification unit. The applicant proposes the certification application according to the unit division principle. Note 1: Category: passenger car tyres, truck tyres, and motorcycle tyres. Note 2: Structure: radial tyres, diagonal tyres, and bias-belted tyres. Note 3: Series: product series specified in GB/T 2978 Size designation, dimensions, inflation pressure and load capacity for passenger car tyres, GB/T 2977 Size designation, dimensions, inflation pressure and load capacity for truck tyres, GB/T 2983 Series of motorcycle tyres, and/or relevant technical documents of the industry.

0 Introduction 1 Application scope 2 Certification standards 3 Certification mode 4 Division of certification unit 5 Certification application 5.1 Submission and acceptance of certification application 5.2 Application documents 5.3 Implementation arrangement 6 Implementation of certification 6.1 Enterprise quality assurance capacity and product consistency (CoP) inspection 6.2 Type test 6.3 Certification evaluation and decision 6.4 Certification time limit 7 Post-certification supervision 7.1 Post-certification follow-up inspection 7.2 Sampling testing or inspection on production site 7.3 Market sampling testing or inspection 7.4 Frequency and time of post-certification supervision 7.5 Record of post-certification supervision 7.6 Evaluation of post-certification supervision results 8 Certification certificate 8.1 Maintenance of certification certificate 8.2 Contents and use of certification certificate 8.3 Change/extension of certification certificate 8.4 Cancellation, suspension and revocation of certification certificate 9 Certification mark 9.1 Pattern of mark 9.2 Use requirements 10 Charges 11 Responsibilities for certification 12 Detailed implementation rules for certification Annex Requirements for CoP inspection

0 引言 本規則基于機動車輛輪胎的安全風險和認證風險制定，規定 了機動車輛輪胎實施強制性產品認證的基本原則和要求。 本規則與國家認監委發布的《強制性產品認證實施規則 生 產企業分類管理、認證模式選擇與確定》、《強制性產品認證實 施規則 生產企業檢測資源及其他認證結果的利用》、《強制性 產品認證實施規則 工廠檢查通用要求》等通用實施規則配套使 用。 認證機構應依據通用實施規則和本規則要求編制認證實施細 則，并配套通用實施規則和本規則共同實施。 認證委托人應能夠承擔認證委托產品的召回、“三包”等相關 質量及法律責任。 生產企業和進口商應確保所生產或進口的獲證產品能夠持續 符合認證及適用標準要求。 對于以O(shè)DM 模式實施的強制性產品認證活動，還應符合《強 制性產品認證實施規則中涉及 ODM 模式的補充規定》的相關要 求。 1 適用范圍 本規則適用于新的機動車輛充氣輪胎，包括轎車輪胎、載重 汽車輪胎、摩托車輪胎，其原始設計的目的是在 M 、N 、O 和 L 類的機動車輛上使用的機動車輛輪胎（ 車輛類別定義參見 GB/T 15089)。 本規則不適用于翻新輪胎及專為競賽設計的輪胎。 由于法律法規或相關產品標準、技術、產業政策等因素發生 變化所引起的適用范圍調整，應以國家認監委發布的公告為準。 2 認證依據標準 GB 9743《轎車輪胎》、GB 9744《載重汽車輪胎》、GB 518 《摩托車輪胎》。 原則上，認證依據標準應執行國家標準化行政主管部門發布 的最新版本。 當需增加新適用標準或使用標準的其他版本時，則 應按國家認監委發布的適用相關標準要求的公告執行。 3 認證模式 實施機動車輛輪胎強制性認證的基本認證模式為： 企業質量保證能力和產品一致性檢查 + 型式試驗 + 獲證后 監督； 注：機動車輛輪胎產品的企業質量保證能力和產品一致性檢 查按照生產一致性檢查的方式進行。 上述獲證后監督是指獲證后的跟蹤檢查、生產現場抽取樣品檢 測或者檢查、市場抽樣檢測或者檢查三種方式之一或各種組合。 認證機構應按照《強制性產品認證實施規則 生產企業分類管 理、認證模式選擇與確定》的要求，對生產企業實施分類管理， 并結合分類管理結果在基本認證模式的基礎上酌情增加生產現場 抽取樣品檢測或者檢查、市場抽樣檢測或者檢查等相關要素， 以 確定認證委托人所能適用的認證模式。 4 認證單元劃分 原則上， 同一生產者（制造商）、 同一生產企業（場所）、 同一類別[注 1]、同一結構[注 2]、同一系列[注 3]為一個認證單元。 認證委托人依據單元劃分原則提出認證委托。 注 1：類別：轎車輪胎、載重汽車輪胎、摩托車輪胎。 注 2：結構：子午線、斜交、帶束斜交。 注 3：系列：《轎車輪胎規格、尺寸、氣壓與負荷》（GB/T 2978 ）、 《載重汽車輪胎規格、尺寸、氣壓與負荷》（GB/T 2977）和《摩 托車輪胎系列》（GB/T 2983 ）標準和/或相關行業技術文件規定的 產品系列。 5 認證委托 5. 1認證委托的提出和受理 認證委托人需以適當?shù)姆绞较蛘J(rèn)證機構提出認證委托，認證 機構應對認證委托進行處理，并按照認證實施細則中的時限要求 反饋受理或不予受理的信息。 認證委托人應向認證機構提供必要的企業信息和產品信息且 對提交認證委托資料的真實性和合法性負責。 不符合國家法律法規及相關產業政策要求時，認證機構不得 受理相關認證委托。 5.2委托資料 認證機構應根據法律法規、標準及認證實施的需要，在認證 實施細則中明確委托資料清單，應至少包括認證委托書或合同、 認證委托人/生產者/生產企業的注冊證明、《生產一致性控制文件》 （按附件要求編寫），《機動車輛輪胎產品技術參數表》和《花 紋組清單》（僅適用于轎車子午線輪胎和載重汽車子午線輪胎， 由認證機構在認證實施細則中明確）。