Article 1.0.1 This regulation is formulated with a view to implementing the relevant national specifications on building fire protection, protecting the steel structures by adopting fire resistive coating, improving the fire endurance of steel structures, accomplishing safety, credibility, state-of-art technology and economic feasibility.
Article 1.0.2 This regulation is applicable to design, construction and acceptance check of the fire resistive coating of the steel structures of buildings and construction works.
Article 1.0.3 The application of fire resistive coating for steel structure not only shall conform to this regulation, but also shall comply with the relevant fire prevention codes and the other current regulations.
Chapter 1 General Provisions
Chapter 2 Fire Resistive Coating and Coating Thickness
Chapter 3 Construction of Fire Resistive Coating for Steel Structure
Section 1 General Provisions
Section 2 Quality Requirements
Section 3 Construction of Thin Fire Resistive Coating for Steel Structure
Section 4 Construction of Thick Fire Resistive Coating for Steel Structure
Chapter 4 Engineering Acceptance
Annex 1 Glossary
Annex 2 Test Method of Fire Resistive Coating for Steel Structure
Annex 3 Calculation Method for Application Thickness of the Fire Resistive Coating for Steel Structure
Annex 4 Measuring Method for the Coating Thickness of Fire Resistive Coatings for Steel Structure
Annex 5 Explanation of Wording in This Regulation
Additional Information
