1 General Provisions
1.0.1 This specification is prepared with a view to implementing national techno-economics policies in the design and fabrication of the connection of structural steel casting for building and achieving safety and serviceability, advanced technology, economic feasibility and guaranteed quality.
1.0.2 This specification is applicable to the design and fabrication of connection of structural steel casting for industrial and civil buildings, and common structures.
1.0.3 The design principle of this specification is developed according to the current national standard "Unified Standard Reliability Design of Building Structures" (GB 50068). The connection of structural steel casting, if used in the building and structure in earthquake area, shall also meet the requirements of the current national standard "Code for Seismic Design of Buildings" (GB 50011).
1.0.4 Not only the steel grade, required mechanical property, chemical composition and other additional guarantee items of connection of structural steel casting but also the requirements regarding welding and surface quality of connection of structural steel casting shall be indicated in design documentation.
1.0.5 For the purposes of this specification, the special requirements of the connection of structural steel casting that directly bears repeated dynamic load and requires fatigue calculation are not considered.
1.0.6 The design and fabrication of connection of structural steel casting shall comply with not only this specification but also current relevant national standards. The connection of structural steel casting not covered by the application scope of this specification shall undergo special review.
2 Terms and Symbols
2.1 Terms
2.1.1 Connection of structural steel casting
The steel casting in a building structure, which connects steel structure components, components or plates together.
2.1.2 Tubular cast-steel joint
The connection of structural steel casting which is formed by uniting the intersected tubes connected with steel tube component through direct teeming.
2.1.3 Spherical cast-steel joint
The connection of structural steel casting which is formed by uniting the hollow sphere connected with steel tube component, and its attached pipe fittings through direct teeming.
2.1.4 Gusset-plate cast-steel joint
The connection of structural steel casting which is formed by uniting the plates connected with steel structure component through direct teeming.
2.1.5 Combined cast-steel joint
The connection of structural steel casting which is formed by uniting steel structure component, parts or plates through combined means of connection.
2.1.6 Casting stress
The internal stresses that are caused by such factors as hindered contraction, thermal effect and phase transition happened in the solidification and cooling processes of connection of structural steel casting.
2.1.7 Fillet
Foreword
1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbols
3 Indexes of Material and Design
3.1 Material for Connection of Structural Steel Casting and Its Selection
3.2 Design Indexes
4 Design Requirements
4.1 General
4.2 Bearing Capacity of Connection
4.3 Principle of Finite Element Analysis for Connection
4.4 Tests of Connection
5 Construction Requirements
6 Processing Requirements
6.1 General
6.2 Casting
6.3 Polishing, Gas Cutting and Machining
6.4 Repair of Defect
6.5 Painting
7 Welding Requirements
7.1 General
7.2 Welding Procedure
7.3 Repair of Weld Defect
7.4 Repair Welding of Cast Steel Joint
8 Inspection and Acceptance
8.1 Acceptance Rules
8.2 External Quality of Connection of Structural Steel Casting
8.3 Physical and Chemical Properties of Connection of Structural Steel Casting
8.4 Nondestructive Testing of Connection of Structural Steel Casting
8.5 Marking, Storage and Transport
Appendix A Properties of Cast Steel Material
Explanation of Wording in This Specification
