標準編號:	CCAP-GZ-6800-2025
中文名稱:	機動車輛產品CCAP標志認證實施規則 汽車座椅及座椅頭枕
英文名稱:	Implementation Rules for CCAP Mark Certification of Motor Vehicle Products Seat and Seat Headrest Products for Motor Vehicles
行業分類:	CC
發布日期:	2025-02-25
實施日期:	2025-2-25
標準狀態:	valid
替代舊標準:	CCAP-GZ-6800:2020 機動車輛產品CCAP標志認證實施規則 汽車座椅及座椅頭枕
翻譯語言:	英文
文件格式:	PDF
中文字符數:	30000 字
翻譯價格(元):	4500.0
交付時間:	付款后 1 個工作日

No.: CCAP-GZ-6800:2025 Implementation Rules for CCAP Mark Certification of Motor Vehicle Products Seat and seat headrest products for motor vehicles 汽車座椅及座椅頭枕 (English Translation) Issue date: 2025-02-25 Implementation date: 2025-02-25 China Certification Center for Automotive Products Co., Ltd. Contents 1 Application scope 1 2 Certification standards 1 3 Selection of certification modes and related requirements 1 3.1 Basic certification mode 1 3.2 Applicability of certification modes 2 4 Certification unit division 2 5 Certification application 4 5.1 Submission and acceptance of certification application 4 5.2 Certification application data 5 5.3 Certification scheme and certification contract 7 6 Implementation of certification 7 6.1 Type test 7 6.2 Initial factory inspection 12 6.3 Certification evaluation and decision 15 6.4 Certification time limit 15 6.5 Service components of discontinued-production vehicle models 16 6.6 Special provisions for "issuing the certificate first and then inspecting the factory" within the same producer (manufacturer) 16 7 Post-certification supervision 16 7.1 Post-certification follow-up inspection 17 7.2 Sampling testing or inspection on production site 18 7.3 Market sampling testing or inspection 19 7.4 Frequency and time of post-certification supervision 19 7.5 Record of post-certification supervision 20 7.6 Evaluation of post-certification supervision results 20 8 Certification certificate 20 8.1 Maintenance of certification certificate 20 8.2 Contents of certification certificate 20 8.3 Change and extension of certification certificate 21 8.4 Cancellation, suspension and revocation of certification certificate 23 8.5 Use of certification certificate 23 9 Certification mark 23 10 Charges 23 11 Certification responsibilities 24 12 Process and timeline requirements related to technical disputes, complaints, and appeals 24 Annex 1 Description of seat and seat headrest products for motor vehicles 25 Annex 2 List of key components/materials for seat and seat headrest products for motor vehicles 27 Annex 3 CoP requirements 29 Appendix 1 Requirements for quality assurance capacity of factory 32 Annex 4 Requirements for the preparation of the CoP control plan and execution report 38 Appendix 1 Recommended format for CoP control plan 42 Appendix 2 Product COP testing and inspection plan 45 Annex 5 Implementation of certification of after-sales service spare parts for discontinued-production vehicle models 46 Annex 6 Principles of production enterprise classification 48 Annex 7 Requirements for testing by utilizing testing resources of production enterprises and utilization of other conformity assessment results 51 Foreword The Rules are formulated and issued by China Certification Center for Automotive Products Co., Ltd. (CCAP), of which the copyright belongs to CCAP. No organization or individual is allowed to use them, in whole or in part, in any form without the permission of CCAP. Revision history of the Rules: On August 10, 2020, the Rules were revised as CCAP-GZ-6800:2020, replacing CCAP-GZ-6800:2019. The main technical changes are as follows: (1) The certification scope has been revised to include the seats and seat headrests for Classes A and I motor vehicles within the Categories M2 and M3 motor vehicles, changing to "applicable to seat and seat headrest products for Categories M and N motor vehicles", and clarifying the scope of non-application; (2) The certification standards have been revised, with GB 15083-2006 being deleted; (3) The implementation requirements for type test have been revised in accordance with the certification standards; (4) The requirements for post-certification supervision sampling testing have been clarified; (5) Annex 1-3 "Description of organic materials used in seat and seat headrest products for motor vehicles" has been added; (6) The structure of the Rules has been adjusted, with the order of some annexes being changed, and Annex 6 "Principles of production enterprise classification" and Annex 7 "Requirements for testing by utilizing testing resources of production enterprises and utilization of other certification results" have been added. The main technical changes in the revision on June 18, 2021 are as follows: (1) The certification standard GB 38262-2019 Flammability of interior materials for buses has been added; (2) Type test items and COP test items for bus seat interior materials to which GB 38262-2019 is applicable have been added; (3) Product description parameters related to bus seat interior materials have been added. The main technical changes in the revision on September 9, 2024 are as follows: (1) The certification standard GB 11550-2009 has been abolished and deleted; the certification standard GB 13057-2014 has been revised to GB 13057-2023; the certification standard GB 24406-2024 Strength of student seat and their anchorages of special school bus has been added (see Clause 2); (2) The subclause "Special provisions for ‘issuing the certificate first and then inspecting the factory’ within the same producer (manufacturer)" has been added (see 6.6); (3) The description of products has been updated (see Annex 1); (4) The validity period of the certificate has been changed to ten years (see 8.1); (5) Some editorial adjustments have been made to the textual description of the Implementation Rules. On February 25, 2025, the serial number of the Implementation Rules was revised from CCAP-GZ-6800:2020 to CCAP-GZ-6800:2025. In addition to editorial adjustments to the text and document structure, other main technical changes are as follows: (1) The "Certification standards" has been modified, with GB 24406-2012 being deleted (see Clause 2); (2) The unit division principles have been revised (see Clause 4); (3) The subclause "Requirements for type test samples" has been modified (see 6.1.2.1); (4) The content of sampling testing or inspection on production site during post-certification supervision has been modified (see 7.2.2); (5) The relevant provisions of the subclause "Change and extension of certification certificate" have been modified (see 8.3); (6) The relevant requirements of the clause "Certification mark" have been modified, with addition of requirements for the use and management of CCC mark (see Clause 9); (7) The description of products has been changed (see Annex 1); (8) The annex "Principles of production enterprise classification" has been modified (see Annex 6); (9) The provisions of the annex "Requirements for testing by utilizing testing resources of production enterprises and utilization of other conformity assessment results" has been modified (see Annex 7). Formulated by: China Certification Center for Automotive Products Co., Ltd. 1 Application scope The Rules are applicable to seat and seat headrest products for Categories M and N motor vehicles, but not to the following seats and seat headrests: (1) Rearward-facing seats and headrests installed on them; (2) Seats or restraint systems for child occupants; (3) Sleeper berths in buses and trucks; (4) Components that constitute the seat assembly, such as seat frame and seat surface cover; (5) Parts that constitute the headrest assembly, such as headrest frame and headrest surface cover. Any adjustment to the application scope due to any change(s) in laws and regulations or related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by CCAP. 2 Certification standards GB 15083-2019 Strength requirement and test method of automobile seats, their anchorages and any head restraints GB 13057-2023 Strength of seats and their anchorages of passenger vehicles GB 24406-2024 Strength of student seat and their anchorages of special school bus GB 8410-2006 Flammability of automotive interior materials GB 38262-2019 Flammability of interior materials for buses The production enterprises shall fully comply with the mandatory requirements of laws, regulations, and standards related to seat and seat headrest products for motor vehicles promulgated by the nation, and meet the corresponding requirements. In principle, the latest versions of the above standards, as issued by the national competent administrative department of standardization, shall apply. Any use of other editions of these standards, where necessary, shall be subject to the announcements issued by CCAP regarding the requirements of relevant applicable standards. 3 Selection of certification modes and related requirements 3.1 Basic certification mode The basic certification mode for implementing the CCAP mark certification of seat and seat headrest products for motor vehicles is: Type test + initial factory inspection + post-certification supervision The basic certification mode is determined based on the inherent safety risk characteristics of products and the production technologies commonly adopted by the production enterprises, on the premise of integrity and self-discipline, effective management and stable production of the production enterprises. The post-certification supervision refers to the supervision of the certified products and their production enterprises by CCAP, which is carried out by one or a combination of the three modes, namely, post-certification follow-up factory inspection, sampling testing or inspection on production site, and market sampling testing or inspection. 3.2 Applicability of certification modes Following the principles of production enterprise classification, CCAP will appropriately add/reduce certification elements for combination as necessary for an enterprise depending on its type on the basis of the basic certification mode. This includes: For Types A and B production enterprises: The post-certification supervision may be carried out by one or a combination of the three modes: post-certification follow-up inspection, sampling testing or inspection on production site, and market sampling testing or inspection. For Types C and D production enterprises: The post-certification supervision may be carried out as post-certification follow-up inspection and supervision sampling testing (either production site sampling or market sampling, or a combination thereof). The certification modes for production enterprises of service components for discontinued-production vehicle models may be selected according to Annex 5. CCAP will determine the certification mode(s) suitable for the certification client based on the characteristics of the product applied for certification, the production modes, and the principles of certification risk control, in conjunction with the results of production enterprise classification management. 4 Certification unit division In principle, the seat and seat headrest products for motor vehicles produced by the same producer (manufacturer) at the same production enterprise (site) that do not have significant differences in the following aspects constitute one certification unit: (1) For seats and headrests to be considered in the same unit under GB 15083-2019: ① The structure, shape, dimensions, materials, and mass of the seats, allowing differences in seat trim cover material and color, and allowing a mass variation of up to 5% from the approved seat model; ② The types and dimensions of the adjustment, displacement and locking systems for the seats, seat backrests, and their components; ③ The types and dimensions of the seat anchorages; ④ The dimensions, frame, material, and padding of the headrests, allowing differences in trim cover material and color; ⑤ The types and dimensions of headrest accessories, and if the headrest is a separate type, the characteristics of the component to which the headrest is attached is also included. (2) For the seats for passenger vehicles to be considered in the same unit under GB 13057-2023: ① The specification, model, and production enterprise of the seats are the same; ② The structure, material, shape, and dimensions of the load-bearing components of the seats are the same; ③ The structural types and models of the adjustment, locking and displacement systems of the seats are the same; ④ The structure, material, and dimensions of the seat attachments and accessories are the same; ⑤ The configuration, type, securing method, and production enterprise of the safety-belts on the seats are the same. (3) For the seats for school buses to be considered in the same unit under GB 24406-2024: ① The type, specification, and production enterprise of the seats are the same; ② The structure, material, shape, and dimensions of the load-bearing components of the seats are the same; ③ The structural types of the adjustment, locking and displacement systems of the seats are the same; ④ The structure, material, and dimensions of the seat attachments and accessories are the same; ⑤ The configuration, type, securing method, and production enterprise of the safety-belts on the seats are the same; ⑥ The G point height of the seat immediately behind it is the same, with a decrease or increase of no more than 72mm. In principle, the certification client shall file the application for certification according to the unit division principles. Products of multiple "models (or specifications)” may be included in the same unit. Products of the same model refer to those that have no impact on conformity with the standards in terms of design. For the same products produced by the same producer but at different production enterprises, or for products of the same model produced by different producers but at the same production enterprise, type test may be carried out on the samples of only one unit. For the products of other production enterprises/producers, the data for conformity verification shall be provided for such purpose.

1 Application scope 2 Certification standards 3 Selection of certification modes and related requirements 3.1 Basic certification mode 3.2 Applicability of certification modes 4 Certification unit division 5 Certification application 5.1 Submission and acceptance of certification application 5.2 Certification application data 5.3 Certification scheme and certification contract 6 Implementation of certification 6.1 Type test 6.2 Initial factory inspection 6.3 Certification evaluation and decision 6.4 Certification time limit 6.5 Service components of discontinued-production vehicle models 6.6 Special provisions for "issuing the certificate first and then inspecting the factory" within the same producer (manufacturer) 7 Post-certification supervision 7.1 Post-certification follow-up inspection 7.2 Sampling testing or inspection on production site 7.3 Market sampling testing or inspection 7.4 Frequency and time of post-certification supervision 7.5 Record of post-certification supervision 7.6 Evaluation of post-certification supervision results 8 Certification certificate 8.1 Maintenance of certification certificate 8.2 Contents of certification certificate 8.3 Change and extension of certification certificate 8.4 Cancellation, suspension and revocation of certification certificate 8.5 Use of certification certificate 9 Certification mark 10 Charges 11 Certification responsibilities 12 Process and timeline requirements related to technical disputes, complaints, and appeals Annex 1 Description of seat and seat headrest products for motor vehicles Annex 2 List of key components/materials for seat and seat headrest products for motor vehicles Annex 3 CoP requirements Appendix 1 Requirements for quality assurance capacity of factory Annex 4 Requirements for the preparation of the CoP control plan and execution report Appendix 1 Recommended format for CoP control plan Appendix 2 Product COP testing and inspection plan Annex 5 Implementation of certification of after-sales service spare parts for discontinued-production vehicle models Annex 6 Principles of production enterprise classification Annex 7 Requirements for testing by utilizing testing resources of production enterprises and utilization of other conformity assessment results

1 適用范圍 本規則適用于M 類、N 類汽車的座椅及座椅頭枕產品。但不適用于下述座椅及頭枕： （1） 后向座椅及其在這些座椅上安裝的頭枕； （2） 兒童乘員使用的座椅或約束系統； （3） 客車和卡車的臥鋪； （4） 構成座椅總成的零部件，如座椅骨架、座椅護面等； （5） 構成頭枕總成的零件，如頭枕骨架、頭枕護面等。 由于法律法規或相關產品標準、技術、產業政策等因素發生變化所引起的適用范圍調 整，應以CCAP發布的公告為準。 2 認證依據標準 GB 15083-2019 汽車座椅、座椅固定裝置及頭枕強度要求和試驗方法 GB 13057-2023 客車座椅及其車輛固定件的強度 GB 24406-2024 專用校車學生座椅及其車輛固定件的強度 GB 8410-2006 汽車內飾材料的燃燒特性 GB 38262-2019 客車內飾材料的燃燒特性 生產企業應全面執行國家頒布的汽車座椅及座椅頭枕產品相關的法律、法規及標準的 強制性要求，且符合要求。 上述標準原則上應執行國家標準化行政主管部門發布的最新版本。當需使用標準的其 他版本時，則應按CCAP發布的適用相關標準要求的公告執行。 3 認證模式的選擇及相關要求 3.1 基本認證模式 實施汽車座椅及座椅頭枕產品CCAP標志認證的基本認證模式為： 型式試驗 + 初始工廠檢查 + 獲證后監督 基本認證模式是以生產企業誠信自律、有效管理、穩定生產為前提，基于產品的固有 安全風險特點和生產企業普遍采用的生產工藝確定的認證模式。 獲證后監督是指CCAP對獲證產品及其生產企業實施的監督，監督方式為獲證后的跟 蹤工廠檢查、生產現場抽取樣品檢測或檢查、市場抽樣檢測或者檢查三種方式之一或各種 組合。 3.2 認證模式的適用性 CCAP將按照生產企業分類原則，針對不同類別的企業，在基本認證模式的基礎上酌 情增加/減少認證要素進行組合，包括： A類、B類生產企業：獲證后監督可采用獲證后的跟蹤檢查、生產現場抽取樣品檢測或 者檢查、市場抽樣檢測或者檢查三種方式之一或者組合。 C類、D類生產企業：獲證后監督應采用獲證后的跟蹤檢查和監督抽樣檢測（生產現場 抽樣或市場抽樣的之一或者組合）。 已停產車型維修部件產品生產企業的認證模式選擇可根據附件5進行。 CCAP根據申請認證產品特點、生產方式及認證風險控制原則，結合生產企業分類管 理結果，以確定認證委托人所能適用的認證模式。 4 認證單元劃分 原則上，同一生產者（制造商）、同一生產企業（場所）生產的在以下方面沒有顯著 差異的汽車座椅及座椅頭枕產品為一個認證單元： （1） 適用GB 15083-2019標準的座椅及頭枕同一單元的要求： 1 座椅的結構、形狀、尺寸、材料及質量，允許座椅蒙皮材料和顏色不同；允許 與已被批準座椅型式的座椅質量有5％范圍內的差異； 2 座椅、座椅靠背及其組成部件的調節裝置、移位裝置及鎖止裝置的型式和尺寸； 3 座椅固定裝置的型式和尺寸； 4 頭枕的尺寸、構架、材料和襯墊，允許其蒙皮材料和顏色不同； 5 頭枕附件的型式和尺寸，若頭枕為分體式頭枕，還包括頭枕連接部件的特性。 （2） 適用GB 13057-2023標準的客車座椅同一單元的要求： 1 座椅的規格型號、生產企業相同; 2 座椅的承載件的結構、材料、形狀、尺寸相同; 3 座椅的調節裝置、鎖止裝置、移位裝置的結構型式、型號相同: 4 座椅連接件和附件的結構、材料、尺寸相同; 5 座椅上的安全帶的配置、型式、固定方式、生產企業相同； （3） 適用GB 24406-2024標準的校車座椅同一單元的要求： 1 座椅的類型、規格、生產企業相同; 2 座椅的承載件的結構、材料、形狀、尺寸相同; 3 座椅的調節裝置、鎖止裝置、移位裝置的結構型式相同; 4 座椅連接件和附件的結構、材料、尺寸相同; 5 座椅上的安全帶的配置、型式、固定方式、生產企業相同: 6 緊鄰其后的座椅的 G點高度相同、減小或增大不超過 72 mm。 原則上，認證委托人應依據單元劃分原則提出認證委托。同一單元中可包含多個“ 型 號（或規格） ”的產品。同一型號是指在設計上對標準符合性沒有影響的產品。 相同生產者、不同生產企業生產的相同產品，或不同生產者、相同生產企業生產的相 同型號產品，可考慮僅在一個單元的樣品上進行型式試驗，其他生產企業/生產者的產品需 提供資料進行一致性核查。 5 認證委托 5.1 認證委托的提出與受理 認證委托人需根據CCAP的認證流程和要求以適當?shù)姆绞较駽CAP提出認證委托，并對 提交認證申請資料的真實性和合法性負責。認證委托人應能夠承擔相關質量及法律責任。 委托認證的汽車座椅及座椅頭枕產品生產者（制造商）和生產企業應能正常生產，并 符合國家法律法規及相關產業政策要求。生產者（制造商）應符合CNCA-00C-008《強制 性產品認證實施規則 自我聲明》對生產者（制造商）的規定，即應是對產品質量負主體 責任并具有獨立法人資格的企業。 CCAP將對認證委托人提交的認證委托資料進行完整性和規范性審查，如審查過程中 發現存在問題，CCAP受理人員將與認證委托人溝通，要求認證委托人對認證委托資料補 充完善后重新提交。資料審查合格予以受理的，CCAP將向認證委托人發出受理通知，并 與委托人簽訂認證合同。資料審查不合格不予受理的，CCAP將向認證委托人發出不予受 理通知，并明確告知不予受理原因。 有下列情形之一的不予受理： （1）不符合國家產業政策； （2）認證委托人、生產者（制造商）、生產企業的注冊證明材料中，經營范圍未覆 蓋認證產品；法律證明材料缺失； （3）列入國家信用信息嚴重失信主體相關名錄。 （4）其他法律法規規定不得受理的情形。 5.2 認證委托資料 認證委托人應按照以下要求提供認證委托所需資料。 （1）認證委托人、生產者（制造商）、生產企業（工廠）基本信息 1）認證申請書；